[Debraj] composed in about his 2-wire serial backpack he established for a graphic LCD screen. A ProtoBoard hunkánál, valamint egy pár 595 eltolási nyilvántartást alkalmaz, hogy egyenlővé tegye a bejövő soros adatokat a párhuzamos interfészhez, amelyet az LCD képernyő használ. Sokkal több időt vesz igénybe arra, hogy parancsokat tegyen így, de az interfész még mindig meglehetősen snappy, amint az ugrás után látható a klipben.
The genuine technique right here is exactly how the hardware has been configured to get away without a third cable for latching the shift registers (if you requirement a primer on 595 chips inspect out this feature). The concept of utilizing a latch is that all of the data can be shifted in over the serial pin before it appears on the output pins. Otherwise, the GLCD would see each bit as it shifts into the register, wreaking havoc on its communication protocol. [Debraj] Óvatosan megy, ha egy diódát, valamint a belépési technikát, amelyet felfedeztek ebből a másik soros LCD projektből.
Az egyik nagyszerű dolog ez a technika az 595 zsetonnal rendelkezik, széles körű kezelési feszültség, amely lehetővé teszi, hogy ezt 3,3 V vagy 5V mikrokontrollerekkel vezesse. Mindazonáltal a kommunikációs protokoll végrehajtására vonatkozó követelményt, valamint azokat a parancsokat soroljuk át. For almost the exact same expense in chips something like an ATtiny2313 might be substituted to make an even easier addressing plan — or even switch to 1-wire protocol. Ezután elveszíti a széles bemeneti feszültség toleranciáját.